Irig Pro Manual Pdf3/13/2021
For iOS users: the external PSU (not included) will charge the devices battery.Always check the specific MIDI input settings in your app to make sure that the app is ready to receive incoming MIDI data.
Always check for specific MIDI output settings in your app to make sure they are set to transmit MIDI data. Check that the phantom power LED is OFF. ![]() If you are using an instrument like a guitar or a bass, connect it using a regular 14 guitar cable to one of the iRig Pro IO instrument input. LED Bright blue: iRig Pro IO is connected and a signal is present at the input of the channel. LED Green: The input signal of the corresponding channel is low. If the LED sometimes flashes RED, you should decrease the iRig Pro IO input gain by rotating the GAIN control counter-clockwise. If the Audio Level LED is red when you play your instrument or sing or talk into a mic, decrease the input gain as described in this guide. Pin 2: hot Pin 3: cold Pin 1: ground Microphone Input Level: from 6 mVpp to 1.4 Vpp Microphone Input Impedance: 1.6 kOhms Gain Range: 40 dB Phantom Power: 48V 4V Frequency Response: 20 Hz - 20 kHz -1.5dB Input Noise: -103 dB(A), -97 dB RMS Instrument Input. All other product names and images, trademarks and artists names are the property of their respective owners, which are in no way associated or affiliated with IK Multimedia.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |